Voltage Divider Calculator

Two resistors in series make a voltage divider. Give it the input voltage and the two resistor values and it works out the output voltage, the current running through the chain and the power in each part.

Work it out

How this works

The formula

Vout = Vin x R2 / (R1 + R2), where R1 is the resistor on the supply side and R2 is the resistor on the ground side. The current through the chain is I = Vin / (R1 + R2), and the power in each resistor is I x I x R.

Worked example

A 9 V supply with a 10 kOhm resistor on top and a 10 kOhm resistor underneath. The output is 9 x 10000 / 20000 = 4.5 V, exactly half the supply.

The chain carries 9 / 20000 = 0.45 mA, and each resistor dissipates 0.00045 x 0.00045 x 10000 = 0.00203 W, about 2 mW. Both halves can be a 10 kOhm 1/4 W part with room to spare.

Common mistake

Forgetting that the output has to be measured against ground, and that anything you connect to it changes it. A divider is only exact when the load draws almost no current. If the input resistance of what you connect is not much larger than the divider resistance, the output voltage drops, and you need a real output buffer instead.

Parts for this

Two resistors and a supply are all a voltage divider needs. Prices and availability are read live when this page is built.

TechCrate volumes that use these parts

Each monthly TechCrate volume arrives with real parts of this kind, so you can try the calculation on a build that arrives in the box.

Next step

ALAI is a member AI assistant and can be wrong. Digital VIP or an active TechCrate subscription is required for member answers. Low voltage hobby electronics only, no mains work.

Other free calculators

All calculators on one page

Free Shipping

On orders over $50

Fast Shipping

Ships within 24 hours

Secure Checkout

256-bit SSL encrypted

Family Owned

Since 2013 in Pine Hill, NJ

Follow us for tutorials, product demos, and maker inspiration!
Added to Cart!