Ohm's Law Calculator

Enter any two of the three values and the calculator works out the third and the power. It is the one formula behind almost every calculation in the other tools here.

Work it out

How this works

The formula

V = I x R. Voltage is measured in volts, current in amps and resistance in ohms. The same three numbers also give the power, P = V x I, measured in watts.

Worked example

A 9 V battery across a 450 Ohm resistor. The current is I = V / R = 9 / 450 = 0.02 A, which is 20 mA, and the power in the resistor is P = V x I = 9 x 0.02 = 0.18 W, so a quarter watt part is fine.

Worked the other way, a 9 V supply with a 20 mA load needs R = V / I = 9 / 0.02 = 450 Ohm.

Where it is useful

Use it to check a circuit before you build it. If you know the supply and the current you want, you know the resistor you need. If you know the supply and the resistor, you know what the current will be before you power it up, and you can compare that with the current rating of the part.

Common mistake

Mixing milliamps and amps. A 20 mA load is 0.02 A, not 20 A, and the difference is a factor of one thousand. Type 0.02 rather than 20 whenever the unit is amps.

Parts for this

A few resistors, an LED and a 9 V supply are enough to build a circuit and check it against Ohm's law. Prices and availability are read live when this page is built.

TechCrate volumes that use these parts

Each monthly TechCrate volume arrives with real parts of this kind, so you can try the calculation on a build that arrives in the box.

Next step

ALAI is a member AI assistant and can be wrong. Digital VIP or an active TechCrate subscription is required for member answers. Low voltage hobby electronics only, no mains work.

Other free calculators

All calculators on one page

Free Shipping

On orders over $50

Fast Shipping

Ships within 24 hours

Secure Checkout

256-bit SSL encrypted

Family Owned

Since 2013 in Pine Hill, NJ

Follow us for tutorials, product demos, and maker inspiration!
Added to Cart!