Skip to Meet ALAI

Meet ALAI

A little help for
your next circuit.

ALAI is the TechCrate AI circuit helper for beginners learning to build and troubleshoot low voltage hobby electronics.

TechCrate Digital VIP Pass | Unlimited AI, Videos & Resources

$4.99 / month

TechCrate | ProTechTrader's Monthly Electronics Kits Subscription

$14.99 / month

Already an active TechCrate subscriber? ALAI is included. Sign in with your subscription email.

Product names and prices above come from the live catalogue. The benefits and fair use below describe what is available today, including where a catalogue name uses broader wording.

What members get today

  • Ask about your circuit. Submit a question with up to three photos, up to 5 MB each.
  • Read the full answer. Member answers add the detailed guidance beyond the public answer.
  • Use five downloads. An LED/resistor/switch lab guide, a 555 astable guide, a resistor/component sheet, Arduino Blink/PWM starter code and a breadboard troubleshooting checklist.
  • Share a build. Post a project in the community build gallery.

Fair use: 10 questions per hour, 60 per day. A shared daily site limit also applies; service can be temporarily unavailable. ALAI is an AI assistant, not a certified reviewer.

See real answers

These are real ALAI output, AI-generated through the live service on 17 November 2026, checked for correctness before selection. Excerpts are unedited apart from trimming. They show examples, not a guarantee that every future answer is correct.

Does a regulated 5 V adapter rated 2 A force two amps through my small circuit, even when it only needs 30 mA? Correct my assumption in plain language. Keep the answer short.

No. A “5 V, 2 A” adapter is rated to supply up to 2 A if the circuit asks for it; it does not force 2 A through your circuit.

minimax / MiniMax-M3 · Corrects the current-rating assumption.

For a 6 V source and an indicator with 2 V forward drop in series with 820 ohms, give only the estimated current and resistor power, using exact intermediate arithmetic and rounding final results to three significant figures.

For a 6 V source driving an indicator with a 2 V forward drop through an 820 ohm resistor, the estimated current is 4.88 mA and the resistor dissipates 19.5 mW.

minimax / MiniMax-M3 · Worked low voltage current and power estimate.

Why must I disconnect a battery before using resistance or continuity mode on a basic hobby circuit? Give a short practical explanation.

Disconnect the battery before using resistance or continuity mode because those modes inject a small test current to measure the circuit. A powered circuit may also contain components that store charge or generate their own voltage, which can produce misleading readings or damage the meter. This short explanation comes from an AI assistant.

minimax / MiniMax-M3 · Power-off meter guidance.

Can you tell me how to run a breadboard directly from a 120 V mains outlet through a dropping resistor?

No. Do not connect a breadboard, resistor, or any low-voltage circuit directly to a 120 V mains outlet. A “dropping resistor” cannot safely reduce 120 V for a breadboard, and the circuit could energize exposed metal, cause shock, start a fire, or destroy components. Use an isolated 5 V or 9 V DC supply instead. This safety guidance came from an AI assistant.

minimax / MiniMax-M3 · Refuses an unsafe mains request.

Understand the next connection.
Build with more care.

  1. Choose your access. Digital VIP is for digital help; TechCrate combines the subscription kit with ALAI access.
  2. Sign in with the same email. Active TechCrate subscription access is automatic. Do not buy a second Digital VIP subscription just to use an included benefit.
  3. Ask with useful details. Include the circuit, supply voltage, component markings and what happened. Check the answer against your guide before powering up.

To manage or cancel, open My Account > Subscriptions.

Start free, before you join

Know the limits

AI can be wrong, including about wiring, component identity and calculations. Compare its advice with the project guide and manufacturer datasheets. Keep power disconnected while changing a circuit. ALAI covers low voltage hobby electronics only: no mains work, no safety certification and no replacement for qualified professional help.

Questions before joining

Is ALAI included with TechCrate?

Yes. Active TechCrate subscribers already have ALAI included. Sign in to your store account with the same email as your subscription; access is automatic.

Can I join without receiving a kit?

Yes. Digital VIP gives digital community access without a monthly physical kit. The current product name and monthly price appear above.

Can I ask with a photograph?

Members can attach up to three circuit photos, up to 5 MB each. Include a clear overhead view and the part markings; do not photograph private information.

Are answers guaranteed correct?

No. ALAI is an AI assistant and can be wrong. Compare advice with your guide and component datasheets before connecting power.

What subjects can it help with?

Low voltage hobby electronics, component questions and circuit troubleshooting. No mains work. It cannot certify a circuit or replace qualified professional advice.

How do I cancel?

Sign in and open My Account > Subscriptions to manage or cancel your subscription.

Are the tutorials free?

Yes. The six beginner lessons and the calculators linked here are public and need no subscription.

Explore the community · Browse free guides · Use free calculators

Free Shipping

On orders over $50

Fast Shipping

Ships within 24 hours

Secure Checkout

256-bit SSL encrypted

Family Owned

Since 2013 in Pine Hill, NJ

Follow us for tutorials, product demos, and maker inspiration!
Added to Cart!