RC Time Constant Calculator

How long a capacitor takes to charge through a resistor, and the same circuit in reverse. Enter the resistance and the capacitance and you get the time constant and the usual charge milestones.

Work it out

How this works

The formula

Tau = R x C, with the resistance in ohms and the capacitance in farads. Tau is the time the capacitor needs to reach 63 percent of the supply voltage, and it is also the time it needs to fall to 37 percent when the circuit is switched off.

Worked example

A 10 kOhm resistor and a 100 uF capacitor give tau = 10000 x 0.0001 = 1 s. The capacitor is 63 percent charged after one second, 86 percent after two, 95 percent after three and 99 percent after five.

That is a slow, visible ramp. A 1 kOhm resistor with the same capacitor gives a tenth of a second, which is fast enough to look instant on a meter.

Common mistake

Waiting one time constant and expecting the capacitor to be full. One tau is only 63 percent. If a timer has to be accurate, wait five taus, and remember that electrolytic capacitors are often rated at minus twenty plus eighty percent, so the real time can be much shorter than the calculation.

Parts for this

The capacitors and resistors are the parts an RC circuit is built from. Prices and availability are read live when this page is built.

TechCrate volumes that use these parts

Each monthly TechCrate volume arrives with real parts of this kind, so you can try the calculation on a build that arrives in the box.

Next step

ALAI is a member AI assistant and can be wrong. Digital VIP or an active TechCrate subscription is required for member answers. Low voltage hobby electronics only, no mains work.

Other free calculators

All calculators on one page

Free Shipping

On orders over $50

Fast Shipping

Ships within 24 hours

Secure Checkout

256-bit SSL encrypted

Family Owned

Since 2013 in Pine Hill, NJ

Follow us for tutorials, product demos, and maker inspiration!
Added to Cart!