Capacitor Code Decoder

Ceramic capacitors are marked with a three digit code instead of a value. Read the code to get the capacitance and the tolerance, or write the code for a value you already know.

Work it out

How this works

How the code works

The first two digits are the value and the third digit is the number of zeros to add, all in picofarads. So 104 is 10 x 10 to the power of 4 = 100000 pF = 100 nF = 0.1 uF, and 223 is 22 x 1000 = 22000 pF = 22 nF.

A letter after the code gives the tolerance. K means plus or minus ten percent, J means plus or minus five percent, and a capacitor with no letter is usually taken as plus or minus twenty percent.

Worked example

A capacitor marked 104K. The code gives 100 nF and the letter gives a tolerance of plus or minus ten percent, so the part is somewhere between 90 nF and 110 nF.

If you need 22 nF, the code is 223, and a 223J would be 22 nF at plus or minus five percent.

Common mistake

Reading the number of zeros as the whole value. 104 is not 104 pF; the 1 and the 0 are the digits and the 4 counts the zeros. The other common slip is mixing up the units, because a listing that says 0.1 uF and a marking that says 104 are the same capacitor.

Parts for this

These are the coded ceramic capacitors and the electrolytics that carry the tolerance letter instead. Prices and availability are read live when this page is built.

TechCrate volumes that use these parts

Each monthly TechCrate volume arrives with real parts of this kind, so you can try the calculation on a build that arrives in the box.

Next step

ALAI is a member AI assistant and can be wrong. Digital VIP or an active TechCrate subscription is required for member answers. Low voltage hobby electronics only, no mains work.

Other free calculators

All calculators on one page

Free Shipping

On orders over $50

Fast Shipping

Ships within 24 hours

Secure Checkout

256-bit SSL encrypted

Family Owned

Since 2013 in Pine Hill, NJ

Follow us for tutorials, product demos, and maker inspiration!
Added to Cart!