Working through the 555 timer chapter and I got the LED blinking circuit working which is awesome, but I don't really understand WHY changing the resistor values changes the blink speed. The book explains it but I'm still fuzzy on what's actually happening inside the chip.
TechCrate editorial answer
Bench Answer
The blink rate is set by how fast your timing resistors (R1, R2) and capacitor (C) charge and discharge — bigger resistor or capacitor values mean slower charging, so the LED blinks slower; smaller values charge faster, so it blinks faster. Here's the full cycle happening inside the chip:
1. The capacitor charges up through R1 and R2 from the supply voltage, with the output pin HIGH during this phase.
1. The capacitor charges up through R1 and R2 from the supply voltage, with the output pin HIGH during this phase.
Unlock the full bench walkthrough
Members get the complete diagnostic workflow, every measurement to take and the verification checklist.
Unlock Digital VIP · $4.99/mo →