Building the transistor switch circuit (2N3904 driving a motor) and the book just says "use a 1K resistor on the base" without explaining how they got that number. If I use a different motor or transistor, how would I figure out the right base resistor myself?
TechCrate editorial answer
Bench Answer
You calculate it from your motor's current draw and the transistor's gain (hFE): divide the load current by hFE to get the minimum base current, apply a 2-5x safety margin for full saturation, then use Ohm's Law with your drive voltage minus the 0.7V base-emitter drop to get the resistor value. Here's the full walkthrough:
**Step 1: Find your load current (Ic).** Check the motor's datasheet or measure it with a multimeter in series — let's say 100mA.
**Step 1: Find your load current (Ic).** Check the motor's datasheet or measure it with a multimeter in series — let's say 100mA.
Unlock the full bench walkthrough
Members get the complete diagnostic workflow, every measurement to take and the verification checklist.
Unlock Digital VIP · $4.99/mo →