-->

LED not lighting up at all — checked polarity twice

S
Samantha P.
Asked on April 6, 2026 • TechCrate Bench Q&A
Built a simple LED + resistor circuit on the breadboard powered by a 9V battery, LED is dead, no light no matter what I try. I flipped it around thinking it was backwards but still nothing. Multimeter shows the battery is fine at 9.2V. What else could be wrong?
TechCrate editorial answer

Bench Answer

The most likely culprit is a broken connection across your breadboard's center gap — the five holes on each side of that gap are electrically separate, so if the LED and resistor legs land on opposite sides without a jumper bridging them, the circuit is open even though it looks connected. Work through this checklist to confirm:

**Step 1: Verify the LED itself works.**
Pull it out entirely and test it directly against the battery through your resistor. If it still doesn't light, the LED may be dead (they can burn out silently if ever connected without a resistor, even briefly). **Step 2: Check your breadboard rows.**
Confirm the LED leg and resistor leg share the same row, or are properly jumpered across the center gap. **Step 3: Confirm your resistor value isn't absurdly high.**
A 1M (brown-black-green) instead of 220-330Ω lets so little current through the LED can appear completely dark. Double check the colour bands or measure it with the multimeter.
Unlock the full bench walkthrough

Members get the complete diagnostic workflow, every measurement to take and the verification checklist.

Unlock Digital VIP · $4.99/mo →
← Back to TechCrate Community HubAsk a Bench Question →

Build Hands-On Projects Every Month with TechCrate

Get complete component kits, companion video guides, and 24/7 AI bench troubleshooting delivered to your door starting at $14.99/mo.

Get TechCrate Today (Free Shipping) →

Free Shipping

On orders over $50

Fast Shipping

Ships within 24 hours

Secure Checkout

256-bit SSL encrypted

Family Owned

Since 2013 in Pine Hill, NJ

Follow us for tutorials, product demos, and maker inspiration!
Added to Cart!