Following the book's dual 555 timer alarm circuit. First chip works fine and stays cool. Second one gets noticeably warm within a few seconds of power on, before I even finish wiring everything. Should I unplug it immediately?
TechCrate editorial answer
Bench Answer
Yes, unplug it immediately — a 555 should stay near room temperature under normal operation, and rapid heating within seconds almost always means the chip is backwards, misaligned across the breadboard's center gap, or has power/ground reversed somewhere in the partial wiring. **Most likely causes, roughly in order of probability:**
1. **The chip is inserted backwards or shifted across the center gap.** This is the single most common cause.
1. **The chip is inserted backwards or shifted across the center gap.** This is the single most common cause.
Unlock the full bench walkthrough
Members get the complete diagnostic workflow, every measurement to take and the verification checklist.
Unlock Digital VIP · $4.99/mo →