Trying to solder my first header pins onto a protoboard for a project. Some joints look shiny and smooth but a couple look dull and grainy/lumpy. Are the dull ones bad? How do I fix them?
TechCrate editorial answer
Bench Answer
Yes, dull and grainy joints are classic **cold solder joints** and should be reflowed before you trust that connection — a good joint is shiny, smooth, and cone-shaped, while a cold one looks matte, lumpy, or cracked because the solder never fully melted and bonded. **Why cold joints happen:**
1. The joint wasn't heated long enough before applying solder (or solder touched the iron tip instead of the joint). 2. The iron tip wasn't making good contact with both the component lead and the pad simultaneously.
1. The joint wasn't heated long enough before applying solder (or solder touched the iron tip instead of the joint). 2. The iron tip wasn't making good contact with both the component lead and the pad simultaneously.
Unlock the full bench walkthrough
Members get the complete diagnostic workflow, every measurement to take and the verification checklist.
Unlock Digital VIP · $4.99/mo →